Wall switch socket waterproof socket surface mounted waterproof wall German socket
Waterproof switch, high waterproof, waterproof grade IP55, we have a special certification system,
the scope of application: outdoor, bathroom, parking lot, basement, etc.
Features
Open angle up to 90° for easy insertion of various plugs
Long service life, PVC plastic film, not hardened for two years
New ABS raw material production,Low water absorption, not easy to deform, good stability, impact resistance, good wear resistance
| Type |
IP55 waterproof wall socket |
| Features |
waterproof |
| Size |
94x86x63, 188x86x63, 118x86x63, 70x85x63(mm) |
| Rated current |
13(A) |
| Rated voltage |
250V |
| Weight |
10.7KG (one piece) |
| Net weight |
9KG (one piece) |
| Model |
one British, one switch + British, two switches + British, two British, two switches + two British, four switches + British |
Installation tips
The installation height of the switch is 1.4M from the ground and 0.2M from the door.
The mounting height of the socket depends on the environment used.
Living room: 30cm from the ground
Kitchen/toilet: 1.4m from the ground
The distance between the 1.8m power cord and the socket of the air conditioner socket should not be less than 50cm.
When installing the power socket, connect the zero line (N) to the left side of the socket, the right side should be connected to the live line (L), and the middle upper part should be connected to the protective ground line (PE).
For household power outlets, it is recommended to use a product with a protective door to protect the safety of family members, especially children.
For the bathroom, the switch or socket installed on the open balcony should be equipped with a corresponding waterproof box.
The switch for controlling the lamps in the bathroom is preferably installed outside the bathroom door to prevent moisture from entering the switch, affecting the life of the switch or causing an accident.
The number of socket configurations is very important, the number of kitchens can not be less, because now there are more and more kitchen appliances, it is best to have sockets on several walls, which is convenient to use.
Our waterproof socket series is more suitable for kitchen wall, which is both beautiful and easy to use.
In the living room, it is best to have a floor socket in the place where the coffee table is placed, with a spare electric kettle and kung fu tea set.
It is also best to install as many as possible of the back wall socket at the TV set. Audio, DVD, TV, water dispenser, etc. should be used.
The bedroom and the corridor are best designed as dual-control switches. This one is open and the head is closed. Especially when you turn off the lights in winter, it is a painful thing!
Before the switch and socket are rebuilt, the position of the furniture should be considered to avoid being covered by the bedside table or bed board, sliding doors, furniture, etc.
A power outlet can be reserved at the side of the toilet. If you want to install Washlet, you need to use a power supply.
